Please note: This bladder is recommended for all Eberlestock packs, with the following exceptions and caveats: It does not fit the X1 series packs. It fits in the main outboard pockets of the Phantom and Halftrack, but not in the narrow sleeve with the hydration hooks.
PRODUCT INFO
Weight: 10 oz

A generously sized, backpackable lightweight dry bag, the J2SD is the perfect complement to your J-Type backpack, for both fair and foul weather. This high quality roll-top dry bag is uniquely suited to Eberlestock J-type packs: for J107, J34, and JP9 packs, it will either drop into the main cargo compartment, or zip onto the outside of the pack at the expansion zipper. For the J51 and J79, it fills either or both of the bulk load positions in the load bay. With approximately 3,000 cubic inches of stowage space secured by a roll-top suitable for a river trip, and with all seams taped, this is a great way to keep your gear dry.

Actual Weight = 14 oz. Shipping Weight = 2 lbs.

These deluxe lightweight padded cases are specially designed to integrate with our products. They are hooked on to our packs with the Padlock system, or can be slung onto a sternum strap. These are not ordinary accessory pouches. As you would expect from Eberlestock, these are high-quality, finely built cases designed to protect valuable equipment. The A2SP (shown in photos with Nikon LX Premier 10 x 42 'nocs, not included of course) is a binocular-sized case, with a second pocket for small sundries. The main compartment is lined with our extra-soft, fleece-like material.

These deluxe lightweight padded cases are specially designed to integrate with our products. They are hooked on to our packs with the Padlock system, or can be slung onto a sternum strap. These are not ordinary accessory pouches. As you would expect from Eberlestock, these are high-quality, finely built cases designed to protect valuable equipment. The A2SP (shown in photos with Nikon LX Premier 10 x 42 'nocs, not included of course) is a binocular-sized case, with a second pocket for small sundries. The main compartment is lined with our extra-soft, fleece-like material.

These deluxe lightweight padded cases are specially designed to integrate with our products. They are hooked on to our packs with the Padlock system, or can be slung onto a sternum strap. These are not ordinary accessory pouches. As you would expect from Eberlestock, these are high-quality, finely built cases designed to protect valuable equipment. The A2SP (shown in photos with Nikon LX Premier 10 x 42 'nocs, not included of course) is a binocular-sized case, with a second pocket for small sundries. The main compartment is lined with our extra-soft, fleece-like material.

Eberlestock Featherweight Rain Covers are a compact and excellent addition to any pack. Like our reversible covers, these are designed to cover either the entire pack and a weapon that is being carried, or just the pack itself so that you can pull a gun from the scabbard. High quality polyurethane-coated nylon.
** Choose the smaller G1RC for "G" and "X"-series packs, or the larger J1RC for J-series packs (both are similar in height, but the J1RC is wider, to go around bulkier loads). **

Eberlestock Featherweight Rain Covers are a compact and excellent addition to any pack. Like our reversible covers, these are designed to cover either the entire pack and a weapon that is being carried, or just the pack itself so that you can pull a gun from the scabbard. High quality polyurethane-coated nylon.
** Choose the smaller G1RC for "G" and "X"-series packs, or the larger J1RC for J-series packs (both are similar in height, but the J1RC is wider, to go around bulkier loads). **

The MultiLid™ uses MOLLE webbing to attach anywhere with compatible webbing, but is most often used and recommended at the top of the pack to function as a quick-access lid for essential items. The MultiLid features a large main open pocket as well as a dedicated water bladder sleeve that fits a standard 3L water bladder. On the underside of the MultiLid is a sleeve where the waist belt is stowed when the lid is pack-mounted. The MultiLid allows the user to downgrade from a pack to a shoulder or waist worn essentials-only go bag.

The MultiLid features a large main open pocket as well as a dedicated water bladder sleeve that fits a standard 3L water bladder. On the underside of the MultiLid is a sleeve where the waist belt is stowed when the lid is pack-mounted. The MultiLid allows the user to downgrade from a pack to a shoulder or waist worn essentials-only go bag. 

Weight - 15oz

The MultiLid™ uses MOLLE webbing to attach anywhere with compatible webbing, but is most often used and recommended at the top of the pack to function as a quick-access lid for essential items. The MultiLid features a large main open pocket as well as a dedicated water bladder sleeve that fits a standard 3L water bladder. On the underside of the MultiLid is a sleeve where the waist belt is stowed when the lid is pack-mounted. The MultiLid allows the user to downgrade from a pack to a shoulder or waist worn essentials-only go bag.

The MultiLid features a large main open pocket as well as a dedicated water bladder sleeve that fits a standard 3L water bladder. On the underside of the MultiLid is a sleeve where the waist belt is stowed when the lid is pack-mounted. The MultiLid allows the user to downgrade from a pack to a shoulder or waist worn essentials-only go bag. 

Weight - 15oz

Our ultralight backpack mountable shooting rest is a perfection of the kind of rest that the Marine Corps Sniper School teaches its students to make. You can attach it to any 3-wide MOLLE or PALS panel (our Padlock system), using its built-in attachment clips. This nicely finished rest can be quickly detached and remounted to various surfaces of your backpack, giving you the ability to set up a field rest with an optimal elevation for the particular place that you're shooting from. This simple rest is a great lightweight alternative to shooting sticks, bipods, and hardware-based shooting rests. Available in our NT7 hunting fabrics or 1000 denier Cordura, to match your Eberlestock pack.

Weight: 1 oz
Set of 4 strap and clip combos designed to allow you to hang Eberlestock accessory pouches from your pack harness, converting them to chest packs. The APSK comes with HD buckles (please be sure to check the compatible item for correct buckles), compatible with our Nosegunner and Scout bino packs and our A2MP, A2SP, or A1SP padded accessory pouches. Designed for the backpack wearer who wants to eliminate a layer of straps: hang your bino case or accessory pouch directly from your pack harness. Kit includes upper straps that attach to your harness D-rings or cross-straps, and a lower set that connect to your hipbelt, or on packs without webbing on the belt, to main the down-rigging on the shoulder harness.

As shown in the picture, we recommend hooking the top hooks into the D-rings on your pack harness, and the bottom clips into the MOLLE webbing on your hip belt. (Note, some smaller packs have a 1" waistbelt which works well for the bottom clip. On packs without 1" webbing on the belt, such as the M5 or X2, you can hook the bottom clip onto the main down-runner of your pack harness).

Designed with modularity at the forefront, the Recon Modular Bino Harness is based on a chest rig platform that can be scaled up or down depending on your needs with a suite of add-on pouches. It features a magnetic forward pull access to the bino pouch, an easy access large front zipper pocket, and stretch side pockets. Low profile MOLLE compatible wings to securely add Recon pouches and accessories.

Designed with modularity at the forefront, the Recon Modular Bino Harness is based on a chest rig platform that can be scaled up or down depending on your needs with a suite of add-on pouches. It features a magnetic forward pull access to the bino pouch, an easy access large front zipper pocket, and stretch side pockets. Low profile MOLLE compatible wings to securely add Recon pouches and accessories.

Designed with modularity at the forefront, the Recon Modular Bino Harness is based on a chest rig platform that can be scaled up or down depending on your needs with a suite of add-on pouches. It features a magnetic forward pull access to the bino pouch, an easy access large front zipper pocket, and stretch side pockets. Low profile MOLLE compatible wings to securely add Recon pouches and accessories.

Designed with modularity at the forefront, the Recon Modular Bino Harness is based on a chest rig platform that can be scaled up or down depending on your needs with a suite of add-on pouches. It features a magnetic forward pull access to the bino pouch, an easy access large front zipper pocket, and stretch side pockets. Low profile MOLLE compatible wings to securely add Recon pouches and accessories.

Designed with modularity at the forefront, the Recon Modular Bino Harness is based on a chest rig platform that can be scaled up or down depending on your needs with a suite of add-on pouches. It features a magnetic forward pull access to the bino pouch, an easy access large front zipper pocket, and stretch side pockets. Low profile MOLLE compatible wings to securely add Recon pouches and accessories.

Designed with modularity at the forefront, the Recon Modular Bino Harness is based on a chest rig platform that can be scaled up or down depending on your needs with a suite of add-on pouches. It features a magnetic forward pull access to the bino pouch, an easy access large front zipper pocket, and stretch side pockets. Low profile MOLLE compatible wings to securely add Recon pouches and accessories.

Designed with modularity at the forefront, the Recon Modular Bino Harness is based on a chest rig platform that can be scaled up or down depending on your needs with a suite of add-on pouches. It features a magnetic forward pull access to the bino pouch, an easy access large front zipper pocket, and stretch side pockets. Low profile MOLLE compatible wings to securely add Recon pouches and accessories.

Designed with modularity at the forefront, the Recon Modular Bino Harness is based on a chest rig platform that can be scaled up or down depending on your needs with a suite of add-on pouches. It features a magnetic forward pull access to the bino pouch, an easy access large front zipper pocket, and stretch side pockets. Low profile MOLLE compatible wings to securely add Recon pouches and accessories.

Designed with modularity at the forefront, the Recon Modular Bino Harness is based on a chest rig platform that can be scaled up or down depending on your needs with a suite of add-on pouches. It features a magnetic forward pull access to the bino pouch, an easy access large front zipper pocket, and stretch side pockets. Low profile MOLLE compatible wings to securely add Recon pouches and accessories.